Posts

With the increasing demands of the customer, home decor makers create new and appealing things for our homes. When it is about windows, we have a variety of curtains, roller shades and so on. If we ask most people, they prefer roller shades over curtains since they require low maintenance.

Roller shades also provide a modern look to your home. They are available in various options in color, texture, and prints. If you are thinking about the DIY installation of roller shades, consider the following steps.

Get Necessary Tools

To install the roller shades inside the mount, you will need a screwdriver, drill machine, and a measuring tape. You would only need these three tools to install the roller shades inside the mount. Therefore, looking forward to knowing how to install roller shades inside the mount should first get the tools for it.

Roller-shade-tools

Insert the Brackets 

The first thing you need to do is the insertion of brackets. Now the insertion of brackets depends on where you want to install the shades, outside or inside the mount. As we are talking about inside the mount, you need to insert the brackets accordingly. Brackets should be fixed within the frame of the window, ceiling, or wall.

Installation of Roller Shades Inside the Mount

The most crucial step is to install the roller shades correctly inside the mount. If you are not satisfied with your work, you can prefer hiring Roller Shades Highlands NC They will make sure to install them in the right way. You need to fit the springs attached to the corner of the shades inside the bracket. Then finally, install the shades into the correct position by fitting them in the brackets.

IRoller-Shades-Inside-the-Mount

Check the Roller Shades 

Gently pull them down until you hear a clicking noise from the bracket. The click is a signal that you have installed it correctly. At last, pull it up again to see if it is going back smoothly or not. You can also find remote shades Highlands NC in without any problem. A remote controller controls these shades.

Conclusion 

We are always excited to do things for our home; inserting roller shades is also one of them. Therefore, you need to make sure not to harm yourself during this DIY. Carefully follow the steps to install the roller shade properly so you won’t need to hire a professional.

Also, don’t forget to test the roller shades to know they are securely attached inside the mount or not. Sometimes, roller shades might be faulty. So you must check to ensure and exchange them in case they turn out to be not working efficiently.

roller shades Rossmoor

The roller shade is an inexpensive and efficient way to block out sunlight as well as maintaining privacy. It also adds color and design to your window giving out an elegant look. Installing them is not a hard job and you can easily do it on your own. These steps will guide you through installing a roller shade quickly and effortlessly.

Gather the Hardware in One Place

The first and foremost step is to gather all the tools together near the window where you’re going to work. Ensure all the needed hardware is near you. That way you won’t have to go again and again to pick a certain tool. So gather the tools and put an end to the confusion about how to install roller shades.

Take Accurate Measurement While Placing Brackets

You must be very focused while installing a roller shade. You will find two brackets within your product. These brackets will hold your roller shades. Carefully mark the location where you want to mount the brackets.

Leave about ¼ inch between the brackets, the back, and top of the window so your shade will be able to roll down easily. Now drill the markings and fix the brackets correctly by checking which bracket goes on the right side and which goes on the left. You can also contact any service to get Somfy shades in Rossmoor CA if you are living there.

Roller Shades Measurements

Precisely Mount Your Roller Shade

Finally, the last step is to mount your shades on the brackets. It is important to note that each side fits on a certain side of the bracket. Therefore, with the help of a retractable plunger, find the inside of your shade and insert that end first. The other end of your shade should be lined up with the grooves correctly.

If you’re looking for some specific solar shades, then you can look it up at solar shades in Western North Carolina WNC and find some great solar shades, if you live there. Also, do not forget to check and ensure that the shades are rolling up and down perfectly after the installation.

Conclusion

Installing a roller shade is easy and it can be done with or without any professional help. Roller shades can enhance the beauty of your room or living space.

It’s also a fun activity and a reason to do something for your home. Installing something in your house gives it a personal touch. It also gives you a break and different work time from your usual busy life. You can also do it with your family to spend some quality time.