cordless-mini-blinds

Mini-blinds and shades that are available on retail stores easily fit windows. It is because they are manufactured on a standard. But if you need blinds for a window that doesn’t fall in the category of standard, the additional length can make the blinds look rather a poor fit for the window. On the brighter side, you can shorten mini-blinds with a little effort.

Follow these steps on how to shorten cordless mini blinds:

1.      Measure Window’s Height

It is to measure the length you need for mini-blinds, from the casing on top to all the way down to the window sill.

2.      Mark The Mini-Blinds To Determine Length

Mark from the top of the casing to the blind slat that corresponds with the window length. Leave a little room for error and mark the mini-blind.

3.      Remove The Rail Plugs

Most mini-blinds come with 3 string ladders with plastic plugs to access the lift cord. You can pull out the plugs without much work.

4.      Lift Cords And Pull Upward

Pull the cords upward until the marked slat is free from the slats. Remember to untie the knot on lift cords because it will lift the cords through the holes.

If it looks too much work, find smart blinds to match your desired size by searching online for “blinds near me in Highlands NC”. If not, move to the next step.

5.      Slide And Remove Slats

Sliding the bottom rail out of the string ladders offers better access to blind slats. Now, remove the number of extra slats. The lift cord is already removed, so sliding out slats is not difficult anymore.

6.      Fix Back The Bottom Rail

When you have obtained the desired length for your cordless mini blind, fix the bottom rail back under the remaining blind slats. Get rid of the unused sections which are no longer needed.

7.      Fix Back Lift Cords

Tie a new knot at the end of each cord. If not sure about the placement of knots, use a measuring tape to ensure they are in the proper position and the mini-blinds will hang evenly.

8.      Replace The Rail Plugs

Before calling it a day, make sure that all 3 rail plugs are in position when you hang the mini-blind in the window. Try opening and closing positions, as well as raising and lowering it to ensure it is working properly.

With the increasing demands of the customer, home decor makers create new and appealing things for our homes. When it is about windows, we have a variety of curtains, roller shades and so on. If we ask most people, they prefer roller shades over curtains since they require low maintenance.

Roller shades also provide a modern look to your home. They are available in various options in color, texture, and prints. If you are thinking about the DIY installation of roller shades, consider the following steps.

Get Necessary Tools

To install the roller shades inside the mount, you will need a screwdriver, drill machine, and a measuring tape. You would only need these three tools to install the roller shades inside the mount. Therefore, looking forward to knowing how to install roller shades inside the mount should first get the tools for it.

Roller-shade-tools

Insert the Brackets 

The first thing you need to do is the insertion of brackets. Now the insertion of brackets depends on where you want to install the shades, outside or inside the mount. As we are talking about inside the mount, you need to insert the brackets accordingly. Brackets should be fixed within the frame of the window, ceiling, or wall.

Installation of Roller Shades Inside the Mount

The most crucial step is to install the roller shades correctly inside the mount. If you are not satisfied with your work, you can prefer hiring Roller Shades Highlands NC They will make sure to install them in the right way. You need to fit the springs attached to the corner of the shades inside the bracket. Then finally, install the shades into the correct position by fitting them in the brackets.

IRoller-Shades-Inside-the-Mount

Check the Roller Shades 

Gently pull them down until you hear a clicking noise from the bracket. The click is a signal that you have installed it correctly. At last, pull it up again to see if it is going back smoothly or not. You can also find remote shades Highlands NC in without any problem. A remote controller controls these shades.

Conclusion 

We are always excited to do things for our home; inserting roller shades is also one of them. Therefore, you need to make sure not to harm yourself during this DIY. Carefully follow the steps to install the roller shade properly so you won’t need to hire a professional.

Also, don’t forget to test the roller shades to know they are securely attached inside the mount or not. Sometimes, roller shades might be faulty. So you must check to ensure and exchange them in case they turn out to be not working efficiently.